95MTS Series Commercial Water Softeners

All systems are available in single, duplex, triplex, and quadplex operation.

Our 95MTS Series softeners provide up to 132 gpm continuous soft water all day, every day and our smart technology will change tanks from on-line to off-line as they are needed so your never under or over producing softwater. All 95MTS systems are available in single, duplex, triplex, and quadplex operation.

MTS systems use 40-50% less salt and regeneration water compared to conventional systems. During periods of high flow demand, tanks come on-line to add flow rate capacity. During periods of low flow demand, tanks go off-line insuring optimal efficiency and product water quality.

95MTS Softener.png

Suitable for Apartments, Boiler Treatment, Breweries & Distilleries, Cooling Towers, Motels, Schools, Nursing Homes, Car Wash, Dairies, Factories, Laundromats, Office Buildings, Resorts, Restaurants, RO Pre-treatment, Office Buildings, Hospitals

Standard Features

  • MTS Controller: Fully programmable remote mounted control box
  • Parallel Flow: All tanks on-line and are interlocked so only one can regenerate at a time
  • Alternating Flow: At least one tank is always off-line for regeneration or ready in stand by
  • Demand Flow: Tanks come on or off-line according to the flow rate demand so that the system is always operating at optimum efficiency
  • System Interlock: A signal from other equipment can be accepted to lock out and prevent the system from regenerating
  • Advanced Diagnostic Information: Easily trouble shoot and access system information in real time
  • Auxiliary Outputs: Up to two programmable outputs / relays can be added
  • Battery back-up system: for up to 9 hours
  • Optional: treated water regeneration

Operating Parameters

  • Operating pressure: 20 - 100 psi
  • Operating temperature: 39 - 100° F
  • Electrical: Input 120V 60 Hz - Output 12VAC 650mA

Materials of Construction

  • Control Valve: Plastic PPO (Noryl)
  • Resin Tanks: Corrosion resistant fibreglass reinforced polyethylene NSF 44 Certified
  • Brine Tank: High density polyethylene (includes plastic salt plate, brine well & cap, air check, and safety float)
  • Ion Exchange Resin: High Capacity IAPMO certified 8% Canature resin

Resources

 
 
Drawing_Tools-100.png

Drawings

  • Naming Convention Guide: ie.) 95MTS 90-1.25D800
  • 95MTS (valve type) 90 (Softener Size), 2 (Valve Size), D (# of Mineral Tanks), 8 (system type*), 0 (Feature 1), 0 (Feature 2)
  • *System types: S (single), D (duplex), T (triplex), Q (quadplex)
Sheet 100.jpg

Specification Documents


More Canature WaterGroup Commercial Softener Systems

 
  85TA Softeners

85TA Softeners

  95sts Softeners

95sts Softeners

  105MTS Softeners

105MTS Softeners

  FHF Softeners

FHF Softeners